A remote control enables users to control the lines from up to ten meters away, which will lessen your workloads. Self-Leveling and Manual Mode This laser level can self-level within 3 ° and indicate out-of-level by flashing and beeping for inclines of over 3 °. It also gives a solution if you need tilt lines Manual Mode.Pressing and holding the OD key for 3 seconds either on the control panel or the remote control will deactivate the self-leveling function and lock the pendulum so the user can position the laser tool at any angle to project non-level straight lines without any indications. Various Positioning Options and Accessories This laser level comes with a magnetic bracket, a lifting table and a 360 ° rotary base with a fine tuning knob. You may use this laser level with or without any of those accessories based on your different purposes in all working and leveling conditions.
There is one ¼ threaded hole on its base so it can be fixed on most of the tripods which can be easily found on the market. 2x 6000mAh Li-ion Batteries It is absolutely the last thing you want to see that your battery runs low when your job is only half done. We know it clearly and we back you up with one extra battery inside the package. The charger can work at both 110v and 220v.You can also charge the spare battery with a micro usb cable, no down time anymore waiting for a charge! 3x360° Green Beam Laser Level. Battery Type: Li-ion (Two Included). Lines Accuracy:1/25In at 16ft. Cross Line Angle Accuracy: 90°±0.025°, ±1/25in/10ft. 9.45 x 8.74 x 6.34 inches. 2 Lithium ion batteries required. 3x360 Degree Vertical and Horizontal Laser Level. Smart Pendulum System that allows laser tool to self-level within 3 degrees while also indicating out-of-level condition by sound-light alarms for inclines of over 3 degrees to help ensure an accurate measurement. When the alarm is on, the unit should be adjusted, making sure that it is placed on a level ground , then followed by the normal line emitting, which adopts the electronic induction principle.
By pressing and holding the "OD" key for 3 seconds on either the control panel or the remote control, the self-leveling function will be deactivated and the pendulum will be locked, in this case the user can place the laser tool at any angle to project non-level straight lines without any indications. A remote control enables users to control the lines from up to ten meters away, which apparently will lessen your workloads. The item "360 Laser Level Green Beam Self Leveling for wall flooring Ceiling Construction" is in sale since Wednesday, September 2, 2020. This item is in the category "Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools". The seller is "happybird0723" and is located in Moreno Valley, California.
This item can be shipped worldwide.